Man wins $2M after mistakenly buying extra lottery ticket

Through Conduit Expanding Gate Valve



Camtech Through Conduit Gate valves offer increased value by incorporating advanced design features. These valves are designs and manufactured with a full bore port, rising stem, OS & Y type with floating seats. These valves are robust in construction and easy In-Line maintainability. The full port bi-directional flow capability minimizes pressure drop and turbulence. The expanding gate valve does not require line pressure to seal and is recommended when a tight mechanical seal is required. The design provides a mechanical seal between the seats and the gate in both high and low pressure applications. There are two piece wedged shape assembly consisting of a Gate and a Segment. The Gate is attached and driven by the stem. Positive sealing is achieved in both high and low pressure conditions by expanding the Gate and the Segment out towards the seats while in a closed position.Get more news about through conduit gate valve,you can vist our website!

The through conduit gate valve is a typical parallel gate valve. Metals Valve supplies through conduit gate valves in two series: slab gate and expanding gate. The closure member(gate/disc) of a through conduit slab gate valve is a slab of metal with a porthole at the bottom. It is provided with floating seats that are spring energized and forced against the disc by fluid pressure. When the valve is fully open, the porthole in the disc engages the valve flow passage port. When the valve is fully closed, the upper solid part of the slab blocks up the valve flow like a blind flange. The through conduit expanding gate valve is developed on the basis of slab gate valve. Instead of one “slab”, the disc consists of two halves with a wedge-shaped interface. Both the female and male gates are provided with complementary opposed inner faces, each formed with two angular-related surface portions diverging transversely. The two halves(gates) are interlinked so that they wedge apart when being moved into the fully open or closed positions, but relax in the intermediate position during the disc travelling stroke. The wedge mechanism ensures tight seal on both upstream and downstream seating surfaces even at low pressure levels. Through conduit gate valves are widely used in oil & gas, petrochemical, power plant and mining industries.

Design Standards: API 6D; ASME B16.5 & ASME B16.47; ASME B31.4, ASME B31.8. End Connections:RF, RTJ, BW. Rising stem, full port, double block & bleed(DBB), bidirectional seating. Operation: Handwheel, Gear, Actuators.

(1) The ISO 5210 mounting pad are provided to facilitate convenient actuator installation.
(2) Venting valve installed to avoid over pressure inside the body-bonnet cavity.
(3) Emergency sealant injection fitting to prevent leakage in case of seating seal’s failure.
(4) Drain plug to release the residue within body cavity.
(5) Spring-energized seats with double O-rings to ensure efficient sealing even at low pressure.
(6) Special HVOF process for the gate: Electric Nickel Plate(ENP), Tungsten Carbide Overlay(TC), Stellite No.6 overlay.
(7) Emergency sealant injection fitting to ensure stem sealing.